Take a look inside
Small outside.
Thought through inside.
Scroll to take Wamda Mini apart, one piece at a time.
Wamda Mini · Pre-launch
Wamda Mini is a small Wi-Fi module that hides behind the wall switch you already have. Install it yourself, then control your lights from the Wamda app.
Designed in Egypt
In development and testing. Not for sale yet.
The idea
Wamda Mini sits inside the wall box, behind the switch you already have. Your switch stays and keeps working. You add control from your phone, schedules and timers, without replacing anything.
The switch on the wall still turns the light on and off, just like before.
No new faceplates and no broken plaster. Mini hides out of sight.
Mini fits inside the wall box that is already there.
Install it yourself
Mini is designed to be fitted by you, in the wall box you already have.
At your electrical panel, turn off the breaker for that room before you open anything.
Connect your wires to Mini's labelled screw terminals, following the wiring guide.
Fold the wires in, place Mini inside the wall box and refit your switch.
Turn the breaker back on, hold Mini's button for 5 seconds and follow the app.
Take a look inside
Scroll to take Wamda Mini apart, one piece at a time.
01 / 05
A smooth face with a button moulded right into it. Press it to switch your light by hand, or hold it to pair with the app.
02 / 05
A tiny clear rod carries the status light up to the surface, so you can see what Mini is doing at a glance.
03 / 05
Designed in Egypt: the Wi-Fi chip, the relay that switches your light and the power circuit, on one compact board.
04 / 05
Two terminal blocks take your home's wires. Guides in the lid lead your screwdriver straight to each screw.
05 / 05
It holds the board on clips, and the lid snaps onto it. No screws to lose. Shaped to sit inside the wall box.
What's inside
Every part has a job. Here is what each one means for you. [CONFIRM list]
Zero-crossing switching
The relay switches at the calmest moment of the electricity wave, so it is gentler on your lights and appliances and puts less stress on every switch-on. [CONFIRM wording with the hardware designer]
Real-time relay calibration
The relay's timing is continuously tuned, so it keeps switching accurately as it ages and conditions change. [CONFIRM what this does exactly]
Light-rod status LED
A soft light on the face shows whether Mini is connected, pairing or offline.
Tactile moulded button
Moulded into the lid, for switching by hand and pairing. One part, nothing loose to rattle.
Screw terminals with screwdriver guides
Screw terminals hold each wire tight, and guides in the lid lead your screwdriver straight to the screw.
Snap-fit enclosure
The case clicks shut without screws and is shaped to sit inside the wall box.
The Wamda app
Our own app, built alongside the hardware. It is still in development. Here is what it is being built to do.
Hold Mini's button for 5 seconds and the app finds it.
Switch your lights from work, from family, from anywhere with internet.
If the internet drops, the app still controls Mini over your local Wi-Fi.
On and off at the times and on the days you choose.
"Off in 30 minutes", or a repeating on/off cycle for as long as you need.
Schedules and timers are stored on Mini itself, so they keep running when the internet is down. [CONFIRM behaviour after a power cut with no internet]
My home
Connected on home Wi-Fi
Living room
Ceiling light
OnOff
Schedules and timers
Timers run on Mini, even offline
Designed and assembled in Egypt
Wamda started with a simple frustration: smart switches that come with English-only apps, no local support and nobody to call. So we designed our own, here in Egypt: the circuit board, the firmware, the app and the enclosure. Mini is assembled here too.
Where we are now (October 2026): the first circuit boards have arrived, and the enclosure has been 3D-printed for fit tests. Next comes testing, starting in our own homes, before anyone else gets one.
[PLACEHOLDER: founder name]
Founder · hardware and firmware engineer
[PLACEHOLDER: one line from the founder, in your own words]
The Wamda family
Ideas on our roadmap. No dates and no promises: we are focused on getting Mini right.
Hides behind your existing switch. One channel; a two-channel Mini Duo is planned.
A smart plug that also measures energy use.
An in-wall switch, from 1 to 4 gang.
For high-power appliances like a heater, AC or pump, with energy metering.
A breaker and meter for the DIN rail in your electrical panel.
A clamp that measures your whole home's energy use.
Early access
Join the list and help shape Mini. It takes under a minute.
Thank you. We'll message you when Mini is ready to try. Your answers help us build the right thing.
Demo mode: this form is not connected yet, so nothing was saved. Set SIGNUP_ENDPOINT in assets/js/config.js.
Questions
Not yet. Mini is in development and testing, and it is not for sale. Join early access and we'll message you first.
No. Mini sits behind your existing switch, inside the wall box. Your switch stays and keeps working.
You need home Wi-Fi. If the internet is down, the app still controls Mini over your local Wi-Fi, and schedules and timers keep running on Mini itself. To control it while you're away from home, you need internet.
Mini connects to your home's mains electricity, so we take this seriously. It is still in development and testing. Before we sell a single unit, we will complete the approvals required in Egypt for electrical and wireless products. Until then, it is not for sale.
2.4 GHz Wi-Fi, which most home routers have. A network that is 5 GHz only won't work.
[CONFIRM] We are confirming this now. Tell us in the form whether your wall box has one; it helps us plan.
Mini is designed to sit inside a standard wall box, behind the switch. [CONFIRM: which box sizes it fits]
Yes, if you are comfortable with basic wiring: breaker off, wires into the labelled terminals, Mini behind the switch. If you are not, ask an electrician; it takes them minutes.
We haven't set a price yet. Early-access members will hear first.